Coax cable termination can be daunting, but if you have the right tools and follow the steps, you'll find it is easy as pie! By following this guide and using the tips provided, you will be medical cable assembly manufacturers like a professional in no time!
Strip the cable The first step, removing the outer jacket from the end of the cable. These tools strip off the right amount of insulation without damaging the internal wires.
Prepare the cable: o Since you already stripped the outer jacket, you are required to prepare the inner wires. Tearing off the insulation at each end so there’s just enough wire for a solid connection, but no exposed copper.
Now you will attach the connector to the end of the cable. Apply a coax cable compression tool to press the connector onto the exposed wires to secure it to the cable. Ensure that the connection is firm to prevent any loss of transmission.
The first step is to attach the connector and test it. Plug the cable into a television or modem to see a strong signal. In case the signal doesn't look clear, you may need to re-terminate it.
EN
