EN
6.0mm 26.5GHz Low-Attenuation Flexible RF Coaxial Cable for Vehicle Antenna Systems
三、Technical Specifications
|
Item |
Specification |
|---|---|
|
Product Type |
High-Frequency RF Coaxial Cable |
|
Nominal Outer Diameter |
6.0mm |
|
Frequency Capability |
Up to 26.5GHz, subject to product specification verification |
|
Cable Performance |
Low-Attenuation Design |
|
Cable Flexibility |
Flexible Cable |
|
Characteristic Impedance |
To be confirmed |
|
Inner Conductor |
To be confirmed |
|
Dielectric Material |
To be confirmed |
|
Shielding Structure |
To be confirmed |
|
Shielding Material |
To be confirmed |
|
Outer Jacket Material |
To be confirmed |
|
Attenuation |
Frequency-dependent values to be confirmed |
|
VSWR / Return Loss |
To be confirmed |
|
Minimum Bend Radius |
To be confirmed |
|
Operating Temperature |
To be confirmed |
|
Cable Length |
Customized according to order requirements |
|
Dimensional Tolerance |
To be confirmed |
|
Application |
Vehicle Antenna Systems / RF Interconnections |
|
Manufacturing Type |
Custom RF Coaxial Cable |
- Overview
- Recommended Products
Required operating-frequency range and RF interface.
Characteristic impedance and permitted tolerance.
Attenuation targets across the required frequency band.
Required VSWR or return-loss limits, where applicable.
Conductor, dielectric, shielding and outer jacket requirements.
Minimum bend radius, cable length and dimensional tolerance.
Required order quantity, packaging and inspection documentation.
Product Overview
HOTTEN 6.0mm High-Frequency RF Coaxial Cable is designed for vehicle antenna systems and other RF interconnections requiring defined cable dimensions and high-frequency signal transmission.
The cable features a nominal outer diameter of 6.0mm and a stated frequency capability up to 26.5GHz. Its low-attenuation design positioning makes it a candidate for applications where cable loss across the required operating band must be considered during RF system design.
Characteristic impedance, attenuation, conductor construction, dielectric material and shielding requirements should be specified according to the actual equipment interface and approved cable datasheet.
HOTTEN supports specification-based RF cable supply, with cable construction and mechanical requirements confirmed against customer drawings, samples or technical specifications.
Technical Specifications
| Item | Specification |
|---|---|
| Nominal Outer Diameter | 6.0mm |
| Frequency Capability | Up to 26.5GHz, subject to test verification |
| Cable Type | Flexible RF Coaxial Cable |
| Cable Performance | Low-Attenuation Design |
| Characteristic Impedance | To be confirmed |
| Inner Conductor | To be confirmed |
| Dielectric Material | To be confirmed |
| Shielding Structure | To be confirmed |
| Outer Jacket | To be confirmed |
| Attenuation | To be specified by frequency |
| VSWR / Return Loss | To be confirmed |
| Minimum Bend Radius | To be confirmed |
| Cable Length | Customized |
| Application | Vehicle Antenna Systems / High-Frequency RF Interconnections |
Final cable specifications, tolerances and electrical test conditions must be confirmed for the selected construction.
Cable Configuration and Customization
For OEM procurement, define the following parameters in the RFQ or approved technical drawing:
| Customization Item | Required Information |
|---|---|
| Outer Diameter | Nominal 6.0mm and permitted tolerance |
| Characteristic Impedance | Required nominal value and tolerance |
| Operating Frequency | Required frequency range and applicable test conditions |
| Attenuation | Maximum attenuation at specified frequencies |
| Inner Conductor | Material, construction and dimensional requirements |
| Dielectric | Material and geometry |
| Shielding | Material, layer configuration and required performance |
| Outer Jacket | Material, temperature range and environmental requirements |
| Mechanical Flexibility | Minimum bend radius and installation conditions |
| Cable Length | Finished length, tolerance and packaging |
| Order Quantity | Required cut lengths or total meters |
The actual conductor, dielectric and shielding structure should be selected according to the required electrical performance and mechanical conditions. These details should not be assumed from the cable OD alone.
Quality Inspection and Acceptance
Inspection requirements should be agreed upon before order confirmation. Depending on the approved specification, applicable checks may include:
| Inspection Item | Purpose |
|---|---|
| Outer Diameter | Verify nominal 6.0mm OD and dimensional tolerance |
| Impedance | Confirm the specified impedance and tolerance |
| Attenuation | Verify signal loss at specified frequencies |
| VSWR / Return Loss | Test where required by the RF interface specification |
| Cable Construction | Verify conductor, dielectric, shielding and jacket against the approved design |
| Flexibility | Check bend requirements where specified |
| Cable Length | Verify cut length and applicable tolerance |
The test frequency, method, limits, sample size and reporting requirements should be stated in the purchase specification. The claimed 26.5GHz capability should be supported by the applicable product data or test results.
RFQ Requirements for a 6.0mm RF Coaxial Cable
For an accurate quotation, please provide:
For vehicle antenna applications, include any applicable routing, temperature or environmental conditions in the specification.
HOTTEN can review your drawing, datasheet or electrical requirements to confirm the cable construction and supply scope before quotation.
Request a Custom RF Cable Quote
Send your RF specification, cable dimensions, attenuation requirements and order quantity for technical review and quotation.
