EN
MHF 4L 1.37mm Micro Coaxial RF Cable Assembly
| Requirement | Customization |
|---|---|
| Connector | MHF 4L / Project-specific configuration |
| Cable Type | 1.37mm Micro Coaxial Cable |
| Cable Length | Customized |
| Connector Orientation | According to application |
| Cable Routing | Customized |
| Drawing | Supported |
| Sample | Supported for evaluation |
| Quantity | Prototype to production quantities |
- Overview
- Recommended Products
Compact RF modules
Wireless communication equipment
RF electronic systems
Miniature antenna interconnections
Wireless modules
Computer and networking electronics
Space-constrained electronic equipment
Other compact high-frequency applications
Connector specification: Confirm the required MHF 4L connector configuration and mating interface.
Cable length: Provide the finished cable length and applicable tolerance.
Frequency requirement: Identify the operating frequency range of the RF system.
Installation space: Confirm the available routing space and bending requirements.
Connector orientation: Connector orientation should match the equipment layout.
Cable routing: Provide the required routing path when the assembly will be installed in a confined space.
Interface requirements: Confirm the RF interface and system connection requirements.
Prototype quantity: Sample quantities can be evaluated before production.
Production quantity: Expected demand helps determine the appropriate production arrangement.
Testing requirements: Define any electrical or RF inspection requirements required for the project.
Drawing / sample approval: A drawing, sample or equipment interface specification can be used for engineering evaluation.
Micro Coaxial Cable Solutions
RF Cable Assembly Solutions
Custom Cable Engineering
High-Frequency Signal Cable Solutions
RF Electronic Systems
Wireless Communication Equipment
Compact RF Modules
Antenna Interconnections
Computer and Networking Electronics
Miniature Electronic Equipment
46AWG HRS DF56/DF36 Micro Coaxial UAV Cable Assembly
42AWG HRS DF81 30-Pin Micro Coaxial Drone Cable Assembly
Custom UAV Cable Assembly for Compact Drone Systems
MHF 4L 1.37mm Micro Coaxial RF Cable Assembly for Compact RF Applications
Product Overview
The HOTTEN MHF 4L 1.37mm Micro Coaxial RF Cable Assembly is a miniature RF interconnection solution designed for compact electronic systems where small cable dimensions and reliable high-frequency signal connection are important.
Using 1.37mm micro coaxial cable with an MHF 4L connector configuration, the assembly is suitable for compact RF and wireless electronic applications with limited internal installation space.
The cable assembly can be customized according to cable length, connector configuration and equipment design. HOTTEN supports custom requirements for prototype evaluation and production projects.
Key Specifications
| Item | Specification |
|---|---|
| Product Type | Micro Coaxial RF Cable Assembly |
| Cable Type | 1.37mm Micro Coaxial Cable |
| Connector | MHF 4L |
| Frequency Application | Up to 6GHz |
| Application | Compact RF and Electronic Systems |
| Cable Length | Customized |
| Connector Configuration | Customized |
| Cable Routing | Customized according to application |
| Manufacturing | OEM / Custom |
| Prototype Support | Available for project evaluation |
Key Features
1.37mm Miniature Coaxial Cable
The 1.37mm micro coaxial construction provides a compact interconnection option for electronic systems where conventional RF cables may require more installation space.
MHF 4L Connector Configuration
The MHF 4L interface is suitable for compact RF interconnection designs where a miniature connector format is required.
High-Frequency RF Applications
The cable assembly is designed for RF applications up to 6GHz, subject to the specific cable and system configuration.
Compact Internal Routing
The miniature cable construction can be used for internal routing in space-constrained electronic equipment.
Custom Cable Length
Cable length and assembly configuration can be customized according to equipment dimensions and installation requirements.
Applications
Customization & Engineering Requirements
| Requirement | Customization |
|---|---|
| Connector | MHF 4L / Project-specific configuration |
| Cable Type | 1.37mm Micro Coaxial Cable |
| Cable Length | Customized |
| Connector Orientation | According to application |
| Cable Routing | Customized |
| Drawing | Supported |
| Sample | Supported for evaluation |
| Quantity | Prototype to production quantities |
Engineering & Procurement Considerations
For a custom MHF 4L micro coaxial RF cable assembly, the following information should be confirmed during project evaluation:
FAQ
What is an MHF 4L cable assembly?
An MHF 4L cable assembly is a compact RF interconnection using an MHF 4L connector and miniature coaxial cable for electronic and wireless applications.
What cable size is used in this product?
This product uses 1.37mm micro coaxial cable.
What frequency can this MHF 4L cable support?
The listed product is intended for applications up to 6GHz. Actual RF performance should be evaluated according to the complete cable construction, connector configuration and system requirements.
Can the cable length be customized?
Yes. HOTTEN can customize cable length according to the customer's equipment design and installation requirements.
Is this cable suitable for compact RF equipment?
Yes. The miniature coaxial construction is intended for compact electronic and RF applications where internal installation space is limited.
Can the MHF 4L connector configuration be customized?
The connector configuration can be evaluated according to the specific project requirements, including connector orientation and cable assembly configuration.
Can HOTTEN manufacture according to a drawing or sample?
Yes. Customers can provide drawings, samples, connector specifications and application requirements for engineering evaluation.
Can prototype quantities be supported?
Yes. Prototype requirements can be evaluated before production to confirm the cable construction and assembly configuration.
What information is needed for quotation?
For an initial quotation or engineering evaluation, provide the connector specification, cable length, operating frequency, drawing or sample, required quantity and application information.
Related Solutions
Related Applications
Related Products
Related Case Study
HOTTEN Engineering Capability
HOTTEN supports custom micro coaxial cable and RF cable assembly projects for compact electronic applications.
Engineering evaluation can be based on connector specifications, cable dimensions, cable length, routing requirements, operating frequency and customer drawings or samples. HOTTEN supports prototype evaluation through production for application-specific cable assembly projects.
Need a Custom MHF 4L RF Cable Assembly?
Send us the connector specification, cable length, operating frequency, drawing or sample and required quantity.
HOTTEN can evaluate the micro coaxial cable construction and assembly requirements for your RF application.
