EN
IP-EX MHP 3 Connector 0.81mm FEP RF Cable Assembly
| Item | Specification |
|---|---|
| Cable Type | Miniature RF Cable Assembly |
| Cable Diameter | Approx. 0.81mm |
| Impedance | 50Ω |
| Jacket Material | FEP |
| Connector | IP-EX MHP 3 |
| Signal Type | RF / High-Frequency Signal |
| Cable Length | Customized |
| Connector Configuration | Customized according to application |
| Assembly Type | Custom Cable Assembly |
| Application | Compact RF and electronic systems |
- Overview
- Recommended Products
0.81mm Miniature Cable Structure – Supports compact equipment and high-density cable routing where installation space is limited.
50Ω RF Configuration – Designed for RF and high-frequency signal transmission applications requiring a controlled impedance configuration.
FEP Jacket – Provides a compact and flexible cable construction suitable for demanding electronic interconnect applications.
IP-EX MHP 3 Connector Configuration – Connector termination can be manufactured according to the required connector specification and assembly design.
Customized Cable Assembly – Cable length, connector configuration, termination and other assembly parameters can be customized according to project requirements.
High-Density Routing – The small cable diameter helps simplify routing in compact electronic equipment and RF modules.
RF communication equipment
High-frequency electronic systems
Compact RF modules
Wireless and communication devices
UAV and drone electronic systems
Cameras and imaging equipment
Test and measurement equipment
Other space-constrained electronic assemblies
Product Overview
The IP-EX MHP 3 Connector 0.81mm FEP RF Cable Assembly is a compact RF interconnect solution designed for high-frequency signal transmission in space-constrained electronic systems. It combines a miniature 0.81mm cable structure, FEP jacket and IP-EX MHP 3 connector configuration to support reliable routing where small cable diameter and controlled RF performance are important.
HOTTEN provides customized cable assembly manufacturing based on customer drawings, connector specifications and electrical requirements, supporting prototype development through volume production.
Product Specifications
| Item | Specification |
|---|---|
| Cable Type | Miniature RF Cable Assembly |
| Cable Diameter | Approx. 0.81mm |
| Impedance | 50Ω |
| Jacket Material | FEP |
| Connector | IP-EX MHP 3 |
| Signal Type | RF / High-Frequency Signal |
| Cable Length | Customized |
| Connector Configuration | Customized according to application |
| Assembly Type | Custom Cable Assembly |
| Application | Compact RF and electronic systems |
Final specifications are subject to the customer's drawings, connector requirements and application conditions.
Key Features
Application Areas
This cable assembly can be used in applications where compact RF interconnection and small-diameter cable routing are required, including:
Customization & Engineering Support
HOTTEN supports OEM, ODM and Build-to-Print cable assembly projects. Customers can provide a drawing, BOM, connector part number, pinout, cable length, quantity and other technical requirements for evaluation.
For RF cable projects, engineering requirements such as impedance, cable construction, connector type, routing space and termination configuration can be reviewed before production.
Typical project stages include:
RFQ / Drawing Review → Prototype → Engineering Validation → FAI / Testing → Mass Production
Testing and inspection requirements can be defined according to the customer's specifications and project requirements.
Procurement Considerations
When evaluating a miniature RF cable assembly supplier, customers should consider more than the cable itself. Connector compatibility, cable diameter, impedance requirements, termination quality, assembly dimensions, routing conditions and production consistency can all affect the final application.
For RFQ evaluation, please provide the available drawing, BOM, connector PN, cable length, required quantity and electrical specifications. HOTTEN can review the requirements and confirm the manufacturability, configuration and quotation basis.
FAQ
Q1: Can the IP-EX MHP 3 connector configuration be customized?
Yes. Connector configuration and cable assembly dimensions can be customized according to the customer's drawing and project requirements.
Q2: Is the cable suitable for RF applications?
Yes. The 0.81mm cable is specified as a 50Ω RF cable configuration for high-frequency signal transmission applications.
Q3: Can the cable length be customized?
Yes. Cable length and assembly dimensions can be manufactured according to the required specifications.
Q4: Does HOTTEN support prototype and mass production?
Yes. HOTTEN can support projects from prototype development and engineering validation through volume production.
Q5: What information should be provided for an RFQ?
A drawing or sample, connector part number, cable length, pinout, required quantity and electrical requirements are recommended. Additional assembly or testing specifications can also be provided.
Request a Custom RF Cable Assembly
If you need an IP-EX MHP 3 connector cable assembly, 0.81mm RF cable or other miniature high-frequency cable assembly, send HOTTEN your drawing, BOM or connector requirements for engineering review and quotation.
