U.FL 1.13mm Micro Coaxial RF Cable Assembly up to 6GHz

U.FL 1.13mm Micro Coaxial RF Cable Assembly up to 6GHz

HOTTEN manufactures customized U.FL 1.13mm micro coaxial RF cable assemblies for compact RF, wireless communication and medical imaging equipment where limited internal space and reliable high-frequency signal transmission are critical.

This miniature RF cable assembly combines a 1.13mm micro coaxial cable with a U.FL-type micro RF connector interface, providing a compact interconnect solution for antennas, RF modules, wireless circuits and high-density electronic systems.

With a small cable diameter and miniature connector structure, the assembly is suitable for applications where conventional coaxial cables are too large for the available installation space. The referenced configuration supports RF applications up to 6GHz, making it suitable for a broad range of compact wireless and high-frequency electronic systems.

HOTTEN supports customized cable length, connector configuration, routing requirements and other mechanical or electrical parameters according to OEM project specifications.

Key Features

🔹 1.13mm micro coaxial cable for compact internal wiring
🔹 U.FL micro RF connector for space-constrained RF applications
🔹 Suitable for RF applications up to 6GHz
🔹 Compact coaxial structure for high-density electronic equipment
🔹 Designed for antenna and RF module interconnection
🔹 Suitable for wireless and medical imaging equipment
🔹 Small cable diameter supports flexible internal routing
🔹 Custom cable length and connector configuration
🔹 OEM development and volume production support

Technical Specifications

Note: Final impedance, attenuation, VSWR, operating frequency range and other electrical characteristics should be confirmed according to the customer's equipment and RF design requirements.

Why Choose HOTTEN for U.FL Micro RF Cable Assemblies?

📡 Miniature RF Interconnect Engineering

HOTTEN specializes in micro coaxial cables and miniature cable assemblies for compact electronic systems where cable diameter and signal performance are important design considerations.

The 1.13mm cable structure provides a practical balance between compact dimensions and RF interconnection requirements.

⚡ High-Frequency Signal Transmission

For wireless and high-frequency applications, the cable assembly must maintain stable RF characteristics while fitting into a limited mechanical space.

This U.FL 1.13mm configuration is designed for applications requiring compact RF interconnections at frequencies reaching 6GHz.

🔌 U.FL Connector Integration

U.FL connectors are widely used where a small RF interface is required inside compact electronic equipment.

HOTTEN can provide the complete cable assembly with the connector integrated, reducing the need for customers to source and assemble individual cable and connector components separately.

🏭 OEM Customization

HOTTEN supports customized:

• Cable length

• Connector configuration

• Connector orientation

• Cable routing

• Cable construction

• Electrical specifications

• Assembly requirements

This enables the RF cable assembly to be developed according to the customer's equipment architecture.

U.FL 1.13mm RF Cable for Compact Wireless Systems

Compact wireless equipment often has very limited internal installation space. A conventional RF cable may occupy too much space or create routing difficulties around PCBs, RF modules and other components.

A 1.13mm U.FL micro coaxial cable assembly provides a smaller interconnect option for:

📶 Wireless communication modules
📡 Antenna connections
💻 Compact electronic devices
📱 Embedded RF systems
🔬 Medical imaging equipment
📷 Camera and imaging systems
🤖 Robotics and smart electronics

The combination of small cable diameter + miniature RF connector + high-frequency capability makes this type of cable assembly suitable for modern compact electronics.

Applications

🔬 Medical Imaging Equipment

Miniature RF cable assemblies can be integrated into medical imaging equipment where internal space is limited and reliable signal transmission is required.

📡 Wireless Communication

The U.FL interface and compact 1.13mm coaxial structure are suitable for internal connections between wireless modules and antennas.

📶 Antenna Interconnects

The cable assembly can be used between compact antennas, RF modules and PCB-mounted RF interfaces where a miniature coaxial connection is required.

📷 Imaging & Camera Electronics

Compact RF and imaging equipment can benefit from small-diameter coaxial cables that can be routed through dense internal structures.

🤖 Robotics & Smart Electronics

Miniature RF assemblies are suitable for robots and intelligent electronic systems where mechanical space is restricted.

🛰️ Embedded High-Frequency Systems

The compact structure is also suitable for embedded electronics requiring high-frequency signal interconnection.

Typical Purchasing Requirements

When sourcing a U.FL 1.13mm RF cable assembly, buyers should normally define:

Connector: U.FL
Cable diameter: 1.13mm
Frequency: up to 6GHz or application-specific
Impedance: typically 50Ω for RF systems
Cable length: customized
Connector orientation: customized
Routing space: according to equipment design
Application: wireless / antenna / medical imaging / RF electronics

Providing these parameters helps the supplier determine the appropriate cable structure and assembly configuration.

Custom U.FL RF Cable Assembly for OEM Applications

HOTTEN provides customized U.FL micro coaxial cable assemblies for OEM electronics manufacturers and engineering teams.

Rather than supplying only loose micro coaxial cable or individual connectors, HOTTEN can integrate the cable and connector into a finished RF cable assembly designed around the customer's mechanical and electrical requirements.

The assembly can be developed from engineering samples through production, supporting projects that require repeatable dimensions, stable assembly quality and customized cable configurations.

FAQ

❓ F: What is a U.FL 1.13mm RF cable assembly?
A: It is a miniature RF cable assembly combining a 1.13mm micro coaxial cable with a U.FL connector for compact wireless, RF and electronic applications.

📡 F: What frequency can this cable support?
A: The referenced product is specified for RF applications up to 6GHz. The final usable frequency range depends on the complete cable, connector and system design.

📐 F: Why choose a 1.13mm micro coaxial cable?
A: Its small diameter helps reduce installation space and allows easier routing through compact electronic equipment.

🔌 F: What connector does this assembly use?
A: The referenced configuration uses a U.FL-type miniature RF connector. Connector configuration can be customized for OEM projects.

🔬 F: Can this cable be used for medical imaging equipment?
A: Yes. The referenced product is intended for medical imaging applications as well as other compact RF and wireless systems.

⚡ F: Is this a 50Ω RF cable?
A: A 50Ω configuration is commonly used for RF interconnection, but the final impedance should be confirmed according to the customer's system requirements.

🔧 F: Can the cable length and connector orientation be customized?
A: Yes. HOTTEN supports customization of cable length, connector configuration, orientation and other assembly requirements.

🏭 F: Does HOTTEN manufacture complete U.FL cable assemblies?
A: Yes. HOTTEN provides complete customized micro coaxial RF cable assemblies for OEM applications.

📦 F: Does HOTTEN support prototype and mass production?
A: Yes. HOTTEN can support customized RF cable assemblies from prototype development through volume production.