MHF4L 1.13mm Micro Coaxial RF Cable Assembly for UAV

MHF4L 1.13mm Micro Coaxial RF Cable Assembly for UAV and Compact RF Systems

HOTTEN manufactures customized MHF4L 1.13mm micro coaxial RF cable assemblies for UAV, drone camera, wireless communication and other compact RF electronic systems.

This miniature RF cable assembly combines a 1.13mm micro coaxial cable with an MHF4L-type micro RF connector interface, providing a compact interconnect solution for antennas, wireless modules, RF circuits and densely packaged electronic equipment.

The 1.13mm cable structure is designed for applications where internal installation space is limited and cable routing must fit around compact PCBs, camera modules, RF components and other electronic assemblies.

The referenced product uses a 50Ω RF configuration and is intended for UAV camera and compact RF applications. HOTTEN can customize cable length, connector configuration, connector orientation and other assembly requirements for OEM projects.

Key Features

🔹 1.13mm micro coaxial cable for compact RF interconnections
🔹 MHF4L micro RF connector for high-density electronic equipment
🔹 50Ω configuration for RF signal transmission applications
🔹 Small-diameter cable for space-constrained internal routing
🔹 Suitable for UAV and drone camera systems
🔹 Suitable for compact wireless and RF modules
🔹 Flexible routing through dense electronic assemblies
🔹 Customized cable length and connector configuration
🔹 OEM prototype and volume production support

Technical Specifications

Note: Final frequency range, attenuation, VSWR and other RF performance parameters should be confirmed according to the customer's cable design and system requirements.

Why Choose HOTTEN for MHF4L Micro RF Cable Assemblies?

📡 Micro Coaxial Cable Engineering

HOTTEN specializes in micro coaxial cable and miniature cable assembly technologies for compact electronic equipment.

The 1.13mm cable format helps engineers achieve compact internal routing while maintaining the coaxial structure required for RF signal transmission.

🔌 MHF4L Connector Integration

MHF4L-type miniature RF interfaces are useful where the available PCB and mechanical space is limited.

HOTTEN provides the complete micro RF cable assembly, integrating the coaxial cable and connector into a finished component for OEM equipment.

⚡ 50Ω RF Interconnection

The referenced product uses a 50Ω RF configuration, which is widely used in wireless, antenna and high-frequency electronic systems.

For specific projects, HOTTEN can develop the cable around the customer's required RF characteristics and operating conditions.

🏭 OEM Cable Assembly Manufacturing

HOTTEN supports customization of:

• Cable length

• MHF4L connector configuration

• Connector orientation

• Cable routing

• Cable construction

• Impedance

• Shielding structure

• Assembly requirements

This enables the RF assembly to match the customer's PCB layout and mechanical design.

MHF4L 1.13mm RF Cable for UAV and Drone Cameras

UAV and drone systems increasingly integrate cameras, wireless modules and other high-density electronics into very compact spaces.

This creates a need for small-diameter RF cables that can be routed around camera modules, PCBs and other internal components without taking up excessive space.

A 1.13mm MHF4L micro coaxial cable assembly can be used for RF interconnections in:

🚁 UAV communication systems
📷 Drone camera systems
📡 Antenna modules
📶 Wireless communication equipment
🛰️ Compact RF electronic systems

The miniature cable structure provides a practical solution for equipment where conventional coaxial cables may be difficult to route.

MHF4L 1.13mm Micro Coaxial Cable for Compact RF Systems

Compact RF equipment often requires several interconnections within a very limited internal volume.

A smaller coaxial cable can help engineers manage:

Cable routing → PCB clearance → connector density → internal mechanical space → RF interconnection

The MHF4L 1.13mm configuration is therefore suitable for applications where miniature dimensions are an important part of the cable design.

Applications

🚁 UAV & Drone Systems

Designed for compact RF interconnections inside UAV and drone platforms, particularly around wireless modules and camera electronics.

📷 Drone Camera Electronics

The compact cable diameter can support RF connections in camera-related electronic assemblies where internal space is restricted.

📡 Antenna Connections

The assembly can be used for connections between miniature antennas, RF modules and PCB interfaces.

📶 Wireless Communication Equipment

Suitable for internal wireless-module interconnections where compact RF cabling is required.

🤖 Robotics & Smart Electronics

Miniature RF cable assemblies can be integrated into robotic and intelligent electronic systems with dense internal wiring.

💻 Compact Electronic Devices

The 1.13mm coaxial structure provides a compact option for RF connections in space-constrained electronic equipment.

Typical Purchasing Requirements

When sourcing an MHF4L 1.13mm RF cable assembly, buyers should normally define:

Connector: MHF4L / compatible interface
Cable diameter: 1.13mm
Impedance: 50Ω
Cable length: customized
Operating frequency: application dependent
Connector orientation: customized
Cable routing: based on internal equipment structure
Application: UAV / camera / antenna / wireless / RF electronics

For RF projects, customers may also need to specify attenuation, VSWR, insertion loss and other electrical requirements.

Custom MHF4L RF Cable Assembly for OEM Applications

HOTTEN provides customized MHF4L micro coaxial RF cable assemblies for OEM manufacturers and engineering teams.

Instead of supplying only loose micro coaxial cable or separate connectors, HOTTEN can provide a complete cable assembly designed around the customer's:

RF requirements + mechanical dimensions + connector interface + cable length + installation environment

This approach is suitable for engineering samples, prototype development and volume production.

FAQ

❓ F: What is an MHF4L 1.13mm RF cable assembly?
A: It is a miniature RF cable assembly combining a 1.13mm micro coaxial cable with an MHF4L-type micro RF connector for compact RF and wireless systems.

📡 F: What is the impedance of this cable?
A: The referenced product is configured for 50Ω RF applications. Final impedance should be confirmed according to the customer's RF system.

📐 F: Why use a 1.13mm micro coaxial cable?
A: The 1.13mm diameter provides a compact cable format that can simplify routing inside equipment with limited installation space.

🚁 F: Can this cable be used for UAV and drone cameras?
A: Yes. The referenced product is specifically intended for UAV, drone camera and compact RF applications.

🔌 F: What connector is used on this cable assembly?
A: The referenced configuration uses an MHF4L-type micro RF connector. Connector configuration can be customized for OEM projects.

📶 F: Can this cable be used for antenna connections?
A: Yes. MHF4L micro coaxial cable assemblies can be used for antenna and RF-module interconnections when the connector and electrical specifications match the equipment.

🔧 F: Can HOTTEN customize cable length and connector orientation?
A: Yes. Cable length, connector configuration and orientation can be customized according to the customer's equipment design.

🏭 F: Does HOTTEN manufacture complete MHF4L cable assemblies?
A: Yes. HOTTEN manufactures complete customized micro coaxial RF cable assemblies with integrated connectors.

📦 F: Does HOTTEN support OEM and mass production?
A: Yes. HOTTEN supports RF cable assembly development from prototypes and engineering samples through volume production.